Gespecialiseerd in truck modificatie

Wij zijn van oudsher gespecialiseerd in het verlengen of inkorten van chassis. Indien
nodig worden aandrijflijnen aangepast, lucht, hydraulica of elektra verlegd en zo nodig componenten verplaatst.
Daarnaast kunnen de volgende modificaties worden uitgevoerd, wide-spreadmontage van aangedreven tandemstellen, hydrostatisch aangedreven voorassen (X-Track) en onder meer het bijplaatsen van een gestuurde Volvo voor- of een naloopas.


Modulair axle configuration system

One of our core products is the Terberg Techniek Modular Axle Configuration System (TTMAC); a conversion package to install an additional steered pusher and/or tag axle on Volvo trucks. The system provides electrohydraulic steering and allows the axles to be lifted. Thanks to its modular construction, a wide range of configurations are available.

The TTMAC range offers a choice of axles, in both pusher and tag types:

  • Volvo 9 or 10-tonne, steered pusher axle
  • Volvo 10-tonne, steered tag axle
  • SISU 11.5-tonne driven, steered pusher axle

The Volvo axle is provided with lift function as standard. When the vehicle is loaded, the axle automatically lowers. An air dump function is available as an option to assist with traction.

The steering system is controlled using Terberg software and a combination of Terberg and Volvo components. The steering geometry, based on the vehicle configuration, can be adjusted in the software, providing a high degree of freedom in positioning the axle on the vehicle. The axle is steered only when necessary, i.e. not when in the lifted position. Finally, Terberg Techniek not only fits axles, but also helps to prepare the vehicle for a specific configuration, and ensures any approvals required are obtained for the modifications. The construction, steering and wheel suspension are completely integrated into the vehicle. TTMAC is used across the world.


Widespread tandem axle assembly

Do you require higher load capacities whilst retaining the same number of axles? Terberg Techniek has the answer. We simply re-position the rear driven axle of a tandem axle. The axle spacing is extended from 1,370 to 1,820 mm and the rear axle is made steerable. With a wide-spread assembly, GVW can be increased by 4 tonnes, and comply with relevant legislation.

The following types are available:

  • 6x4 T-ride: GVW increased from 29 to 33 tonnes
  • 8x4 T-ride: GVW increased from 39 to 43 tonnes
  • 6x6: GVW increased from 29 to 33 tonnes
  • 8x6: GVW increased from 37 to 41 tonnes

Both tandem-driven axle types have hydraulic suspension. Steering and height adjustment are controlled by the Terberg SBC (single-board computer). The automatic height adjustment ensures that the chassis is at driving height at vehicle speeds above 5 km/h.

Terberg Techniek staat voor kwaliteit, flexibiliteit, innovatie en integriteit.

Terberg Techniek Making more possible

Call Techniek Baarlo

Office Hours: 7:30am - 5pm
UTC Monday - Friday


+31 77 465 86 33

Call Techniek Hoogeveen

Office Hours: 7:30am - 5pm
UTC Monday - Friday


+31 528 27 15 89

Call Techniek IJsselstein

Office Hours: 7:30am - 5pm
UTC Monday-Friday


+31 30 600 62 60